The Oxygen Deficiency Safety Alarm is a 0-23% room oxygen monitor designed to protect staff from oxygen depletion. This device is designed to be mounted near nitrogen, argon, helium or other inert gas sources. It can also be used in walk-in refrigerators or freezers with temperatures as low as -50°C.

Our Oxygen Deficiency Safety Alarm is used in laboratories, pharmaceuticals, cryogenics, process cooling, freezers, manufacturing and research facilities.

Features

Provides 24/7 protection for you and your staff against oxygen deficiency
90db audible and visual alarm on the sensor and remote display (90db)
3 user-configurable alarms meet all OSHA codes
The remote display can be mounted up to 300 feet away
Long-life zirconium oxide sensor, lasts up to 10+ years!

*A surge protector is required for safeguard and longevity of the monitor*

Oxygen Deficiency Depletion Safety Alarm

$1,199.00

Quantity

RAD-0022-ZR: Display Add On. Designed to provide additional read-outs to be connected for additional alarm points. (up to 3 read-outs per device).
CM-1027: Dual Strobe Add On Kit. Plug flashing strobes into both the sensor and remote display to give a more visual alarm. Used in high-noise environments or where required by an inspector.
CM-1029: Industrial Strobe Siren. The Industrial Gas Strobe Sirenis designed to provide an additional flashing indicator of a potential gas leak in indoor areas that are using/storing compressed gases.
CM-1026-6: 24 VDC Strobe Tower Add-On Kit - same features as CM-1026-5 for 24 VDC hard-wired systems
Certificate of Calibration - Available on request in comments at purchase. For factory recalibration order part no. CAL-0001 here.
SV-1029 - Solenoid Shut-Off Safety Valve
Specifications
Measurement Range: 0-23% display
Display Resolution: 0.1%
Accuracy: Better than 2% FS
Pressure Dependence: Not pressure dependent
Response Time: O2: <2min by 90%
O2 Deficiency Alarms (default): AL1 19.5%, AL2 16.5%, and AL3 12%.
Sound Alarm: 90db @ 10cm
Alarm Response Time: < 60 seconds
Warm-Up Time: 600 seconds (10 min) for full operating temperature range
Operating Temperature: -58°F to 122°F (-50°C to 50°C)
Sensor Life Expectancy: 10+ years
Weight: 1.5lbs (Monitor only)
Dimensions: 8.25 in x 7.8 in x 3 in
Electrical
Power Supply: Output: 12VDC, 2000mA.
Power Input: 100~240 VAC, 50/60Hz, 0.6A (25 ft. Ethernet cable - included)
Power Consumption: 3 Watts
6 VDC battery backup connections
Relays: Peak Current < 2A @ 30 VDC or 250 VAC, SPDT
4-20mA output
A surge protector is required for safeguard and longevity of the monitor.

Oxygen Deficiency Depletion Safety Alarm

Add-On Options

Specifications